Delayed Coking Valve Applications

Delayed Coking is a key thermal conversion process in many refineries today. It is a cyclic process that thermally cracks vacuum residue or other residue feedstocks into gas, light products and petroleum coke.


Despite being an established process for over 50 years Delayed Coking presents several challenges. It is one of the most hostile environments in the refinery. Process temperatures can reach 1000 Degrees F, and the by product Coke is very abrasive and erosive. Fully solidified coke is harder than concrete. As a result of these environmental factors valves are cycled more frequently than in other parts of the refinery.

Valve failure can lead to the complete shut down of a refinery unit, and this down time is a large process and financial cost.


Valves for Delayed Coking

SchuF has designed a range of valves for use in Delayed Coking operations.
These include the key switch, isolation, bypass, backpressure and overhead vapour valves. The valves are based on an original SchuF patented (received in 1914) invention – the lift plug Model 12 and Model 14

 IsoPlug valve for Delayed Coking

20 inch lift plug isolation valve, Photo: ©SchuF


SchuF can also provide valves for all other required functions in and around the delayed coking process from its extensive range of valves (e.g. for drain, warm or quench functionality the SchuF  Model 30 valves can be used.)

Lift Plug Valves Advantages

The simple and rugged design delivers many benefits:

  • Protected Valve Seat (PVS) – Valve life is increased as seat or body faces do not come in contact with the flow media
  • Total Sealing between body and plug ensures clean cavities and reduces maintenance significantly
  • Trunnion spindle guiding can be used for high pressure applications or to prevent vibration
  • Flushing and/or Purging is only required during operation from open to close or vice versa. This leads to significant cost savings in comparison with other valve designs
  • Efficient Lift, Turn and Reseat (LTS) operator mechanism
  • Automated Control Panel (ACP) can be used to control single or multiple valves, actuators and sensors
  • Top or bottom entry design for ease of maintenance

Are you looking for a special valve design fitting your requirements?

Please contact Mr. David Donne (Global Sales Director) at:  or  T +49 6198 571 110

print top home

Video gallery
A video showing the operation of a recently-manufactured SchuF powder-sampling Valve is now available-please click the link below, which will take you to the Vimeo video-sharing website. The video will begin automatically. more